-
ProductsThe production site control and standardized assembly line are designed according to European standards. The products are divided into 8 series and 115 models.
-
Service SupportComps's service system covers all major and medium-sized cities across the country. Not only does the company have a complete service team, but it is also committed to developing and training professional dealers and service providers across the country to form a huge service network, ensuring that more than 80% of the country's cities and surrounding areas; service personnel arrive at the scene within 24 hours after receiving the notice.
-
NewsInnovation is the life of an enterprise. Comps pursues sustainable operation. Every year, 10% of sales are invested in joint technology research and development with professional colleges.
-
About UsShijiazhuang Comps Compressor Co., Ltd. was established in June 2004 with a registered capital of 35 million yuan. The company is located at 172 Nanche Road, Luancheng District, Shijiazhuang, Hebei Province. It is a high-tech enterprise integrating research and development, manufacturing, and marketing, and enjoys a high reputation in the industry. In 2017, Kangpu Compressor Co., Ltd. built a new factory area with an investment of 160 million yuan, covering a total area of 158 acres. The company's production and manufacturing center covers an area of 68 acres.
-
ApplicationThe service system of Comps company spreads all over the country, we have technical force and can make response to the actual needs of users.
Two stage screw compressor: comps compressor specifies how the condensate of the two-stage screw compressor is discharged
During the use of the two-stage compression screw machine, the exhaust temperature will be lower than the air pressure or the shutdown cooling temperature, resulting in a lot of condensate, especially in wet weather or high temperature areas. These air with condensed water condenses in the oil-gas separator. Excessive water in the oil will cause emulsification of the lubricating oil, destroy the quality of the oil and affect the stable operation of the machine.
All the above conditions will cause poor lubrication of the compressor host, corrosion of the screw rotor, deterioration of the oil-gas separation core, and corrosion of air compressor components. Therefore, while paying attention to the supplement or replacement of lubricating oil, it is also necessary to pay attention to the frequent discharge of condensate, and the condensate discharge schedule should be formulated according to the humidity and temperature. Generally, it shall be discharged once a week, and it shall be discharged once every 2-3 days in high temperature or high humidity climate.
Condensate discharge method:
1. The two-stage screw compressor is shut down until there is no pressure in the oil-gas separation tank, sufficient cooling and sufficient condensate
Screw out the front plug of the ball valve at the bottom of the oil-gas separation tank.
2. Slowly open the oil drain valve to drain the condensate, and quickly close the valve when the oil flows out.
3. Screw on the ball valve front plug.
Shijiazhuang comps Compressor Co., Ltd. is a high-tech enterprise engaged in R & D, production and sales of air compressors, with more than 200 employees. Its main products are oil-free mobile machine, drilling air compressor, two-stage compression screw machine, centrifugal air compressor, high-pressure mobile machine, etc. Welcome to inquire.
More information
Scan the code to follow the official information
All rights reserved：Shijiazhuang Comps Compressor Co., Ltd 冀ICP备15000208号-1 Website building：300.cn Beijing SEOtag