图片名称

What are the key points of the use and maintenance of the Best Variable Speed electric driven screw air compressor SPM35 from China


1. Inspection before starting up. Before starting the Best Variable Speed electric driven screw air compressor SPM35 from China, it is necessary to carefully check whether the power line is loose, the machine door lock, and whether the oil level is up to standard, etc., to ensure the safe operation of the equipment.Best Variable Speed electric driven screw air compressor SPM35 from China2. Pay attention to the key points during operation. After starting up, you should always pay attention to whether there is abnormal vibration and noise of the Best Variable Speed electric driven screw air compressor SPM35. If there are abnormalities such as oil leakage and air leakage, stop the machine immediately for inspection. At the same time, after starting the Best Variable Speed electric driven screw air compressor SPM35 from China, do not loosen the plug of its pipeline or open some unnecessary valves. When the temperature is too high and the oil level drops significantly during the operation of the equipment, stop it immediately.
3. Regular cleaning and maintenance. Since the lubricating oil of the Best Variable Speed electric driven screw air compressor SPM35 is often condensed by the cold air of the cooler, it is necessary to drain and clean the water regularly after a period of use, so as to prevent the water from being brought into the post-cycle system of the Best Variable Speed electric driven screw air compressor SPM35 from China by the gas and cause abnormal operation. In addition, since dust in the air will accumulate on the surface of the filter, it is necessary to clean the air filter at the inlet to avoid clogging. The oil level parameters of the Best Variable Speed electric driven screw air compressor SPM35 should also be recorded regularly, and the lubricating oil should be replenished in time to avoid wear of gears and other components when the oil level decreases.