图片名称

NEWS INFORMATION


Double stage compression screw machine: double stage compression screw machine how to work in detail.

At present, in the screw air compressor on the market, there are mainly two kinds of single-stage compression and two-stage compression. Single-stage compression is more familiar to everyone and widely used. In actual use, some air compressors with large power and large gas production demand often use two-stage compression screw machine.

30

2022

/

05

A brief discussion on the selection factors of two-stage compression screw machine

We must first understand the demand for compressed air in the selection of two-stage compression screw machine, including the quality and quantity of air requirements for the end user in the factory. A careful assessment of these requirements and a good understanding of the differences between the two will ensure that our two-stage compression screw system is properly configured.

30

2022

/

05

Double stage compression screw machine: double stage compression screw machine gradually replaced the piston compressor

At present, domestic manufacturers of two-stage compression screw machine through the introduction of technology, technical cooperation or independent research and development, improve the technical content and performance quality of the product, with the improvement of the requirements of the use of environment, energy consumption, environmental protection and other aspects, refrigeration unit energy saving is one of its development trends.

30

2022

/

05

How to deal with double - stage compression screw machine high temperature fault specific overview

Compared with the piston air compressor, the screw air compressor has more accessories: sensors, temperature control valves, filters, master controls and so on, which also makes the screw air compressor relatively complex structure of the piston machine, and the later maintenance is also important. Of course, in the face of high temperature environment, the operation state of accessories also need to pay attention to. The following compus compressor to specify how to deal with the two-stage compression screw machine high temperature failure.

30

2022

/

05

Compus compressor explain why the double - stage compression screw machine nose stuck

Head stuck is a common fault of two-stage compression screw machine, generally because of insufficient lubricating oil, but some need maintenance personnel to check to judge, the following compus compressor specifically explains the cause of two-stage compression screw machine head stuck.

30

2022

/

05

双级压缩螺杆机:康普斯压缩机具体说明双级压缩螺杆机冷凝水如何排放

双级压缩螺杆机在使用的过程中会因为排气温度低于空气的压力或停机冷却温度,造成冷凝水产生很多,特别是在天气潮湿或温度很高的地区。这些带冷凝水空气在油气分离器中凝结,油中含有过多的水份将会造成润滑油的乳化,破坏油的品质,影响机器的稳定运行。

30

2022

/

05