Screw air compressor is an oil-injected single-stage twin-screw compressor, divided into single-screw type and twin-screw type. It adopts pulley transmission to drive the main engine to rotate for air compression. The compressed air in the main engine is cooled by oil injection, and the main engine is discharged. The mixed gas of air and oil is separated by two stages of coarse and fine separation, and the oil in the compressed air is separated, and then clean compressed air is obtained. The cooler is used to cool compressed air and oil. The use of pre-set configuration, only a single power connection and compressed air connection, and built-in cooling system, so that the installation work is greatly simplified. The screw compression component in the screw air compressor is manufactured in-house by a new type of CNC grinder, combined with online laser technology to ensure accurate manufacturing tolerances. Its reliability and performance can ensure that the operating cost of the compressor is always low during the service life. So do you know what its classification is? Let’s take a look at it with the editor of Variable Speed ​​electric driven screw air compressor SPM35Y!
The body of the screw compressor is divided into two types, one is a belt drive type, and the other is a direct drive type. Among them, the belt drive type is more suitable for compressors with a power of about 22KW. The power is driven by two belt pulleys manufactured according to the speed ratio; the direct drive type is a coupling that combines the electric source with the main engine, and the worm type The compressor can directly drive the worm to rotate, while for the twin-screw compressor, a speed-increasing gear must be added to increase the speed of the main rotor.
In summary, the editor of Variable Speed ​​electric driven screw air compressor SPM35Y tells about its classification-related knowledge, I hope you can learn more.